Studio Monitors

JBL SUB 18 is ideal to complement the JBL M2 system or for applications that require serious frequency response very powerful and accurate.

ARTICLE N° 55215
  • Subwoofer JBL by Harman
  • Ideal for use with the system JBL M2
  • Response "In-room" (2π): less than 18 Hz
  • Frequency response: 10 dB (measured 4π) 20 6
  • Hz frequency response: -6 dB (4π measure) 23.1 Hz
  • maximum peak power: (2π) 137 dB SPL
  • system input Power: AES / Hr 2: LF 2000W continuous / 8000W peak
  • Sensitivity: 92dB at 1m, 2.83 V
  • recommended power amplifier from 3500 to 4000 W into 8Ω
  • recommended signal Processor power amplification Crown iTech HD. Preset for use with JBL M2 available.
  • LF Driver: JBL 2269H, 18 inches (457 mm); double coil 100 mm (4 inches)
  • Two neodymium magnets.
  • Nominal impedance 8Ω
  • Speaker: 18mm birch plywood
  • Finish: black lacquer
  • Input connectors 2 terminals
  • Fil recommended: 12-Gauge
  • HxWxD Dimensions (including foot): 685 x 762 x
  • 620 mm Weight: 45 kg
Speaker
 18"
RMS power (W)
 2000
Peak power (W)
 7000
Acoustic pressure (dB)
 From 130 to 140
Impedance
 8 Ohm
Connectors
 Terminal block / Euroblock
Power supply
 Power adapter (included)
With a response below 18 Hz and a 137 dB peak efficiency, the Sub18 delivers unprecedented performance for demanding music production, while providing the exceptional accuracy required in movie post-production applications. As a complementary module M2 Master Reference Monitor system from JBL, the Sub18 allows an output level three times higher.

Spotlight on