Digital Mixing Desk

The Allen & Heath Avantis is a 64-channel digital mixing console with 42 configurable buses, equipped with 12 motorized and backlit faders, it offers an ultra-low latency of 0.7 ms thanks to its 96 kHz XCVI FPGA engine. The "Continuity UI" user interface, with its 15.6-inch Full HD touchscreen, facilitates smooth and fast interaction between physical controls and the screen. The dPack effects pack allows you to boost the audio processing performance of your console by adding renowned plugins.

ARTICLE N° 93520
  • Allen & Heath Avantis Solo + dPack
  • Allen & Heath Avantis Solo
  • Digital mixing console
  • 96 kHz XCVI FPGA processor
  • Control surface and touchscreen: Harmony UI
  • 12 motorized faders, 6 layers
  • 3 fully assignable rotary controls
  • Programmable keys: 18
  • 15.6” HD capacitive touchscreen, viewable in daylight
  • Touch control: pinch, sweep, drag and drop
  • Dedicated multi-mode EQ view, full multi-point metering
  • Fully recallable Mic/Line preamp
  • Multi-user, password protection
  • Configurable access levels and permissions
  • Dynamic range: 109 dB
  • Input sensitivity: -60 ⭢ +15 dBu
  • Signal-to-noise ratio: -92 dB
  • Analog gain: +5 ⭢ +60 dB, in 1 dB increments
  • Frequency response: 20 Hz - 30 kHz +0/-0.8 dB
  • Pad: -20 dB active
  • THD+N: 0.0015% @ +16 dBu output, 1 kHz, 0 dB gain
  • USB audio playback: MP3 / FLAC / WAV mono / stereo files, 16/24 bit, 44.1 ⭢ 96 kHz
  • USB audio recording: WAV stereo files, 24 bit, 96 kHz
  • Connections:
  • Mic / line inputs: 6x XLR, +48 V phantom power
  • Line outputs: 6x XLR, latency: 0.7 ms
  • Digital stereo input: 1x XLR AES3
  • Digital stereo output: 1x XLR AES3
  • SLink etherCON port x1 for I/O expansion
  • Gigabit Ethernet network ports: 2x RJ45
  • Wordclock I/O: 1x BNC
  • PAFL prelistening: Mini-jack Ø3.5 mm + Jack Ø6.35 mm
  • USB-A x2 playback + recording / file transfer, archives and updates
  • I/O expansion slots x2: 128 channels at 96 kHz each
  • Power supply: 100-240 V AC, 50-60 Hz, 150 W
  • Dimensions: 627 x 546 x 269 mm
  • Weight: 17.5 kg
  • Allen & Heath dPack
  • dLive plugin and effects pack
  • DEEP Compressors: PeakLimiter 76 / 16T / 16VU / Mighty / Opto / OptTronik / Bus
  • DEEP Expanders: Source Expander / Dual Threshold Expander - DEEP Preamp: Dual Stage Valve Preamp - DEEP EQ: NEQ12 - Dyn Dynamics: 16 x Dyn8 instances - RackExtra FX: Hypabass / Transient Controller
The Avantis Solo from Allen & Heath is a 64-channel digital mixing console with 42 configurable buses, designed to deliver ultra-low latency of 0.7 ms thanks to its 96 kHz XCVI FPGA engine.
The user interface is intuitive with its 15.6-inch Full HD touchscreen that allows for seamless interaction between physical controls and the display, providing quick and visual access to parameters.

One of the key innovations of the Avantis Solo is its "Continuity UI", which allows the faders to react to touch to instantly highlight active channels, providing immediate visual feedback and intuitive manipulation of gains, pans, EQ or compression.
The system is equipped with many features such as a next-generation 61-band RTA (real time analyzer), RF integration with Shure and Sennheiser wireless microphones, and powerful audio processing options.

The Allen & Heath Avantis Solo is compatible with a variety of expansion card options including Dante, Waves, gigaACE and MADI, providing increased flexibility for system integration, FoH/monitor splits, and multitrack recording.
Additional I/O ports expand local capabilities with XLR analogue inputs and outputs, as well as digital AES connections, meeting the needs of complex installations.

Sound reinforcement professionals can configure and customise the Avantis Solo using the Avantis Director software, MixPad app and Custom Control app, or via a range of remote controllers and GPIO interfaces.
These tools enable precise parameter management and extensive control of on-stage IEM mixes, from additional fader banks to FoH.

When you add the dLive Pack to your Avantis Solo console, you get Dyn8, a sophisticated processor with 4 bands of dynamic EQ and 4 bands of multiband compression, for mastering vocals, tightening subgroups, or adding sonic cohesion to the mix.

This pack allows for the insertion of 16 Dyn8 engines across the input and mix channels, dramatically expanding the way professionals approach dynamics processing.

In addition to Dyn8, the dLive Pack features DEEP Compressors and the Dual Stage Valve preamp, bringing classic emulations directly into the Avantis Solo input and mix channels with zero latency, without taking up effects slots or requiring third-party equipment.

dPack-exclusive RackExtra effects, such as Transient Controller and HypaBass, rival the best third-party plug-ins while eliminating latency or phase issues.
Number of ways
 64
Bus
 42
Groups
 Yes
Motorized faders
 Yes
Audio interface
 USB 2.0
DAW MIDI Control
 Yes
Stereo line input
 6
Micro input
 modular
Digital input
 AES/EBU, etherCON, RJ45
Digital output
 AES/EBU, etherCON, RJ45
Headphone output
 2
Word clock
 Yes
Digital multi-channel / network
 Ethernet
Output channels
 Modular
FX Sends / Returns
 Yes
Effects
 Yes
EQ
 Yes
Media player
 USB
Screen
 Touchscreen
Optional expansion cards
 Yes
Recording medium
 USB
USB port
 Yes
Power supply
 Power adapter (included)
Weight
 17,5 kg

Spotlight on