Allen & Heath - XONE:92 MK2
The Allen & Heath XONE:92 MK2 is the undisputed benchmark in analog DJ mixers, delivering legendary sound with modernized features. Featuring redesigned VCF filters, a new innoFADER® crossfader and optimized ergonomics, this mixer is designed for top-level performance.
Specifications
-
Allen & Heath XONE:92 MK2
-
4 + 2 channel analogue DJ mixer
-
New modernised Storm Grey livery and redesigned UV screen printing
-
New clean feed switches for Mic/Return inputs
-
New 3-way global fader curve selector
-
Recessed VCF, X-Fade and Mic/RTN Duck filter assignment switches for improved ergonomics
-
Optimised Xone:VCF filters and RIAA preamps
-
EQ: 4-band on channels 1 to 4 and on Mic/Return channels 1 – 2
-
Booth section: Stereo/Mono, Mute, Level controls
-
Phono inputs: 4 RCA on channels 1 to 4
-
Stereo line inputs: 4 RCA on channels 1 to 4, 2 TRS jacks on Return 1 – 2 (Mono/Stereo)
-
Mic Input: 2 XLR for Mic 1 - 2
-
Ground Terminals: 1, with dual adapter included
-
Mix 1 Output: 1 XLR (balanced)
-
Mix 2 Output: 1 TRS jack (unbalanced)
-
Booth Output: 1 TRS jack (unbalanced)
-
Record Output: 1 RCA (unbalanced)
-
Stereo Send/Return I/O: 2 TRS jacks (Aux 1 & 2, mono/stereo), 2 TRS jacks (Return 1 & 2, mono/stereo)
-
Aux Sends: 2 for channels 1 – 4, Mic/Return 1 and Mic/Return 2 (Pre or post)
-
Filters: 2 stereo analog VCF (Voltage Controlled Filters), with HPF (High Pass Filter) / BPF (Band Pass Filter) / LPF response control (low pass filter), silent ON/OFF switches, adjustable FREQ/RES/LFO parameters, silent assignment to channels 1 to 4.
-
Crossfader: standard mini InnoFADER Pro with 45 mm linear VCA, user replaceable (article number: AI11470)
-
Crossfader curves: adjustable via potentiometer, from a smooth transition to an ultra-fast cut. - Channel Faders 1 – 4: Individually replaceable 60 mm VCA faders
-
MIDI Assignment: MIDI CC, MIDI Note On/Off
-
MIDI Output: 1 x 5-pin DIN
-
Output Levels (nominal / max):
-
Mix 1: +4 dBu / +25 dBu
-
Mix 2: +6 dBu / +21 dBu
-
Booth: +8 dBu / + 21 dBu
-
Record: - 10 dBu / + 12 dBu
-
Internal Headroom: +22 dB (channels)
-
Frequency Response: +1/-0.5dB from 20Hz to 30kHz (Line In to Master Out)
-
Distortion: Typically 0.01% @ 1kHz, 0dBu (THD+Noise 22Hz to 22kHz)
-
Mic Gain: +30dB, EIN = -126dB (@ 40dB gain with a 150R source) - RIAA gain: +35dB @ 1kHz (14mV RMS= 0VU @ 1kHz) - EQ channels 1 to 4: - HI: 2.4kHz + 6/-∞dB - HM: 1.8kHz + 6/-30dB - LM: 320Hz + 6/ -30dB - LO: 220Hz + 6/-∞dB - Mic/Return channel EQ: - HI: 12kHz +/-15dB - HM: 2.7kHz +/-15dB - LM: 270Hz +/-15dB - LO: 60Hz +/-15dB - Chassis: Steel
-
Power supply: Internal Switching Power Supply [SMPS] with automatic detection of mains input
-
Mains: 100 -240V AC, 50/60 Hz, ON/OFF switch on the rear panel
-
Maximum consumption: 30W
-
Mains adapter: 3-pin IEC plug with cable clamp (supplied)
-
Dimensions: 376 x 320 x 106 mm
-
Weight: 7 kg
Presentation
A central feature of this console is its dual VCF (Voltage Controlled Filter), optimized to provide more precise control over frequencies. Each channel has the option of being assigned to one of the two filters, allowing smooth transitions without unwanted clicks thanks to silent switching. The control of the resonance and filter cutoff frequencies is now even more precise, giving DJs perfect control over the effects during their sets. This revision of the VCF filters offers flexibility to sculpt the sound in real time, whether with gradual rises or abrupt filters.
The EQ section is also a strong point of the XONE:92 MK2. Each channel features a fully analog 4-band EQ, with a total kill on the high and low frequencies (HI and LO), and adjustable mids (HM and LM) for granular control of the mix. This feature is particularly suited to DJs looking for control over long transitions and cuts, essential for genres such as techno or house.
The new version of the XONE:92 includes an innoFADER® Pro crossfader, improved to offer better fluidity and increased longevity. The crossfader is user-replaceable and allows customization thanks to a curve adjustment via potentiometer, allowing to go from a smooth transition to an instant cut.
The design of the XONE:92 MK2 has been slightly revisited with a new Storm Grey finish, modernizing its visual without unfamiliarizing users. UV screen printing allows for better visibility of buttons and potentiometers in low-light environments, as is often the case in clubs and festivals.
The analog audio circuit of the XONE:92 MK2 has also been redesigned to maximize sound quality. The new phono preamps make it possible to get the most out of vinyl, with an RIAA curve specially adapted to electronic music, offering clarity of low frequencies. This optimization allows for a better match between Line and Phono sources, facilitating the transition between vinyl and digital sources while maintaining impeccable sound quality.
To complete this set, the XONE:92 MK2 is equipped with 6 stereo channels, including 4 for phono/line inputs and 2 for mic/line inputs. Each channel has a dedicated preamp and can be assigned to specific filters, allowing for complete customization of the sound according to the musical style or the DJ’s preferences.
Finally, the XONE:92 MK2’s improved connectivity includes XLR outputs, dedicated Booth outputs with stereo/mono monitoring, and a mic input optimized for clean feed, ensuring pure sound even with vocal sources. The new DI inputs and stereo returns allow for the incorporation of external instruments or effects, making the console as versatile in live as in the studio.
Information
To go further...
- 4 Phono/Line + 2 Mic/Line channels
- 100% analog circuitry and mix bus summing
- Dual analog VCF filters with silent switching
- High-precision 4-band EQ
- Dedicated Mini innoFADER® Pro for even smoother mixing
- New modernized Storm Grey livery and redesigned UV screen printing
- New 3-way global fader curve selector
- Improved channel 1-4 input level and source matching
- Reduced stereo channel distortion
- New Mic/Return input clean feed switches
- Recessed VCF, X-Fade and Mic/RTN Duck filter assignment switches for improved ergonomics
- Optimized Xone:VCF filters for even more efficient control
- Optimized RIAA preamps
- Comes with a dual grounding adapter
You may also like
Spotlight on
Allen & Heath is proud to have designed all of its mixers from its headquarters in Cornwall, England since 1969. Allen & Heath's R&D team maintains the company's place at the forefront of technology and is committed to using the best materials to deliver the ultimate mixing experience and outstanding audio performance. Today's Allen & Heath mixers are used and enjoyed by bands, houses of worship, and clubs for DJ, broadcast and studio applications. Check out the ZED Series for the demanding sound engineer and the Allen & Heath XONE Series for the creative DJ!