Antelope Audio - IsoChrone 10MX
Antelope Audio's Isochronous 10MX master clock delivers the precision of 10M, and the revolutionary Trinity Jitters management algorithm. Either the two best master clocks, now combined into one product, which is the most stable and the most musical clock in the world. The Antelope 10MX is perfectly suited for recording, mixing and mastering environments.
Specifications
-
Antelope Audio Isochronous 10MX.
-
Phase Noise (SSB): 1Hz ≤-70 dBc / Hz / 10Hz ≤-87 dBc / Hz / 100Hz ≤-114 dBc / Hz / 1kHz ≤-130 dBc / Hz / 10kHz ≤-140 dBc / Hz.
-
Short-term stability: t = 1s ≤E-11E-11 / t = 10s ≤6E-11E-11 / t = 100s ≤E-12.
-
Warm-up time: 8 - 10 minutes (depends on the ambient temperature).
-
Clock Word Clock Input: 1 x Word Clock Input @ 75 Ohms 3Vpp on BNC 44.1 - 384kHz.
-
Outputs:
-
Word Clock: 4 x BNC BNC.
-
AES / EBU: 2 x XLR.
-
S / PDIF: 2 x RCA.
-
Word Clock Outputs: 4 x Word Clock Outputs @ 75 Ohms 3Vpp on BNC 44.1 - 768 kHz square wave signal.
-
USB I / O: vUSB 2.0 Hi-Speed; Data stream up to 480M bits / 384kHz, Type B.
-
clock system 4th generation of acoustically focused clocks.
-
64-bit DDS.
-
Oven controlled crystal oscillator.
-
Clock stability <+/- 0.0 2 PPM, oven controlled at 64.5 ° C.
-
Atomic reference type: Resonance master oscillator with ultra-stable rubidium resonance.
-
Frequency: 10 MHz.
-
Frequency Accuracy> ± 5E-11 @ 25C (± 0.05 PPB).
-
Aging
-
Daily * ± 2.5E-11.
-
Monthly * ± 1E-10.
-
Annual ± 1E-9.
-
(* After 1 day and 1 month of operation respectively)
-
Atomic Clock Outputs
-
10 x BNC Sinusoidal, 10MHz, 75 Ohm, 1Vpp typical (offload)
-
Sample Rate (KHz)
-
32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 768.
-
Word clock specifications
-
TTL level, 75 Ohm Output impedance Output impedance.
-
USB
-
USB 2.0 Full-Speed, Type B, only for control.
-
Operating Temperature: 0-50 ° C, 32-122 ° F.
-
Weight: 2.8 kg.
-
Dimensions: 482.6 (W) х (D) х 44 (H) mm.
-
Power supply: AC.
-
Energy consumption: 15 W.
-
Humidity: 30 - 80% RH without condensation.
-
Input of the power supply / 100 - 240 V.
Information
Spotlight on
Antelope Audio has been a leading manufacturer of high-end professional and consumer audio devices for over 20 years, harnessing the power of digital audio without sacrificing the warmth typically associated with analog devices. The FPGA and Synergy Core (FPGA + DSP) technologies built into its audio interfaces allow for highly accurate component-level modeling of legendary studio equipment such as vintage EQs and compressors, exceptional microphones, guitar amps and cabinets, tube mic presets, tape saturation, and more to be found in the Synergy Core interfaces and modeling mics.
Similar Products
Tops of the brand
