Audio Technica - PRO25ax
128,33 €
excl VAT
with eco participation: 0,50 €
In Stock
Usually shipped within 4 days
+infos
Warranty 3 years
Jessie
Louis
Need help ?
Wired Microphones
Hypercardioid Dynamic Instrument Microphone with quality Audio Technica, a Must for money!
ARTICLE N° 22262
Specifications
-
Capsule: Dynamic
-
Directivity Hypercardioid
-
Frequency response: 30-12 000 Hz
-
Sensitivity: 54 dB (1.9 mV) ref 1V / Pa
-
Impedance: 600 Ohm
-
Weight: 230 g (8.1 oz)
-
Dimensions: Length 113.0 mm (4.45 ") diameter 50.0 mm maximum (1.97")
-
Output Connector: Type Integral 3-pin XLR M
-
Accessories: AT8471 isolation clamp for threaded feet 5/8 "-27; thread adapter for 5/8" -27 to 3/8 "-16; soft protective pouch
-
Ideal for kick drum, percussion, brass and other powerful instruments
-
Excels in applications with high sound pressure level
-
Response to warm bass frequencies and excellent presence
-
Rejection off upper axis for maximum gain before hooking
-
Numerous mounting options and effective mitigation of mechanical noise thanks to the insulating clamp foot included AT8471
-
Contacts plated XLR-type connectors M gold, corrosion resistant
-
Robust all-metal body
-
Hypercardioid for better isolation of the sound source
Presentation
Ideal for kick drum, percussion, brass and other powerful tools.
Excels in applications with high sound pressure level.
Warm response at low frequencies and excellent presence.
Excels in applications with high sound pressure level.
Warm response at low frequencies and excellent presence.
Information
Capsule type
Dynamic
Application
Drum / percussions, Guitar / bass amplifier
Directivity
Hypercardioid
Impedance
600 Ohm
Power supply
No power supply required
Connectors
XLR male 3 pins
Accessories included
Clip, Carrying Bag
To go further...
The output of the microphone is symmetrical low impedance, XLR
male, 3 pins. The signal is symmetrical between pins 2 and 3,
the hot spot is two (the positive voltage on the hot spot
is generated by a positive acoustic pressure on the capsule).
Ground (shield) is on pin 1.
To avoid phase cancellation and poor sound
quality, all mic cables must be connected so
consistently: Pin 1-Pin 1, etc.
The PRO 25ax comes with AT8471 isolation clamp that
provide secure mounting, versatile positioning, and a good
attenuation of unwanted mechanical noise.
Make sure that no foreign particle enters the
windscreen. An accumulation of iron filings or steel
on the diaphragm and / or foreign bodies in the meshes of the
windscreen can degrade performance.
male, 3 pins. The signal is symmetrical between pins 2 and 3,
the hot spot is two (the positive voltage on the hot spot
is generated by a positive acoustic pressure on the capsule).
Ground (shield) is on pin 1.
To avoid phase cancellation and poor sound
quality, all mic cables must be connected so
consistently: Pin 1-Pin 1, etc.
The PRO 25ax comes with AT8471 isolation clamp that
provide secure mounting, versatile positioning, and a good
attenuation of unwanted mechanical noise.
Make sure that no foreign particle enters the
windscreen. An accumulation of iron filings or steel
on the diaphragm and / or foreign bodies in the meshes of the
windscreen can degrade performance.
You may also like
Audio Technica - PRO25ax
Audio Technica - PRO25ax
128,33 €
excl VAT
with eco participation: 0,50 €
In Stock
Usually shipped within 4 days
+infos
Warranty 3 years
Jessie
Louis
Need help ?
Spotlight on
Founded in 1962, Japan's Audio-Technica is a leading manufacturer of AT4033, AT4041 and Artist Elite studio and stage microphones, AT2020 USB+ podcast microphones, professional wireless systems, ATH-M series headphones, AT-LP140XP turntables and DJ accessories. Developments such as Uniguard's anti-RFI technology, which protects microphones from WiFi, Bluetooth and other modern sources of radio interference, demonstrate their commitment to providing musicians and engineers with the high-quality sound they've come to expect.
Similar Products
Tops of the brand
