Elipson - MPH II
408,33 €
excl VAT
In Stock
Usually shipped within 5 days
+infos
Warranty 3 years
Jessie
Mathis
Need help ?
HiFi Pre-Amplifiers
Make your Elipson P1 preamp compatible with all vinyl turntables thanks to the Elipson MPH II additional module. This phono module offers high performance and preserves the smallest details of recordings for faithful and complete listening. Enjoy the rich sound of your vinyl records with this RIAA MPH II module.
ARTICLE N° 94962
Specifications
-
Elipson MPH II
-
RIAA Phono Stage for Elipson P1
-
MM (moving magnet) and MC (moving coil) cell compatible
-
MM and MC switch
-
MM input gain: 41 dB
-
MM input impedance: 47 kΩ
-
MM signal-to-noise ratio: 76 dB
-
MM input sensitivity: 7.5 mV
-
MC input gain: 61 dB
-
MC input impedance: 100 Ω
-
MC signal-to-noise ratio: 83 dB
-
MC input sensitivity: 750 mV
-
Bandwidth: 25 Hz to 80 kHz
-
Output impedance: 600 Ω
-
Connection:
-
1 x 2 RCA stereo input
-
Earth plug x 1
-
Dimensions: 92 x 78 x 25 mm
-
Weight: 50g
Presentation
The Elipson MPH II additional module is a phono pre-amplification stage designed to take place in the Elipson P1 Hi-Fi pre-amplifier, by simply inserting it into the dedicated space on the rear side of the preamp which will immediately recognize it.
It will allow your Elipson P1 to be compatible with vinyl turntables, whether they are equipped with moving magnet (MM) or moving coil (MC) cartridges.
The MPH II delivers superb performance with high signal-to-noise ratio and crosstalk to transmit the signal seamlessly, preserving the finest details of vinyl recordings for high-fidelity listening.
The RIAA MPH II module is an essential accessory to fully appreciate the rich sound of vinyl records directly on your Elipson P1 preamp.
It will allow your Elipson P1 to be compatible with vinyl turntables, whether they are equipped with moving magnet (MM) or moving coil (MC) cartridges.
The MPH II delivers superb performance with high signal-to-noise ratio and crosstalk to transmit the signal seamlessly, preserving the finest details of vinyl recordings for high-fidelity listening.
The RIAA MPH II module is an essential accessory to fully appreciate the rich sound of vinyl records directly on your Elipson P1 preamp.
Information
Accessory Type
Expansion card
Frequency response
25 Hz - 80 kHz
You may also like
Elipson - MPH II
Elipson - MPH II
408,33 €
excl VAT
In Stock
Usually shipped within 5 days
+infos
Warranty 3 years
Jessie
Mathis
Need help ?
Similar Products
Tops of the brand
