Static Microphone

Lewitt LCT 140 AIR Stereo Pair, pair of small diaphragm condenser microphones. The two LCT 140 Air have a cardioid polar pattern, are perfectly matched and offer two types of sound: Flat and Air. With this set, your recordings of acoustic instruments or choirs will be impeccable!

ARTICLE N° 76818
  • Lewitt LCT 140 AIR Stereo Pair
  • Pressure gradient transducer
  • Directivity: cardioid
  • 17mm polarized capsule
  • Frequency response: 20 to 20,000 Hz
  • Dynamic range: 115 dB
  • Sound pressure limit: 135 dB
  • Sensitivity: 14.6 mV / Pa, -36.7 dBV / Pa
  • Equivalent sound level: 20 dB (A), cardioid
  • Switchable preset EQ: Flat / Air
  • Switchable pre-attenuation: 0 dB / 12 dB
  • Switchable low pass filter: linear or 80 Hz with slope of 12 dB / octave
  • Internal impedance: 173 Ohms
  • Nominal load impedance: 1000 Ohms
  • Supply voltage: 48 V ± 4 V
  • Current consumption: 7.2 mA
  • Balanced output without transformer
  • Connector: 3-pin gold-plated XLR
  • Durable and lightweight CNC aluminum housing: it is durable and easy to handle
  • Microphone dimensions: 24mm diameter x 140 mm
  • Net weight of each microphone: 66 g
  • Contents of the box:
  • 2x LCT 140 AIR paired
  • Transport bag
  • 2x Microphone clips
  • 2x Windscreens
With their two sound signatures, AIR and FLAT (switchable), the Lewitt LCT 140 AIR offers you two solutions to be sure to succeed in your recordings. In AIR mode, they offer wide, clear, sparkling sound. This mode saves time in post-production. In FLAT mode, the frequency response is linear and gives a faithful reproduction of the source: your shots will be perfectly realistic.

The pairing of these pairs of LCT 140 AIR is the most precise on the market, thanks to a frequency response measurement procedure and the sensitivity of each microphone.
The LCT 140 AIRs are perfect for recording instruments such as acoustic guitars, drums, strings, backing vocals, pianos, ukuleles, and more.
Capsule type
 Capacitor
Application
 Drum / percussions, Acoustic guitar
Directivity
 Cardioid
Switchable pad
 Yes
Switchable Bass-Cut filter
 Yes
Acoustic pressure (dB)
 From 130 to 140
Shockmount included
 No
Microphone clip
 Yes
Complete set
 Yes
Power supply
 Via +48 V phantom power supply
Connectors
 XLR male 3 pins
Frequency response, upper limit
 20 kHz
Frequency response, low limit
 20 Hz
Packaging
 Pair
The best stereo pairing ever:
A measurement system controls the polarization voltage of the capsule to adjust the sensitivity, which is therefore the same for all LCT 140 AIR. Then, an algorithm compares the measured frequency response of each microphone and finds the perfect pairs.

Excellent transient response and total flexibility on all instruments:
Transients are the DNA of your instrument's sound. To maintain the natural musicality of your instruments, the LCT 140 AIR offers excellent transient response.
And to cover any eventuality, the LCT 140 AIR has a low-cut filter and an attenuation PAD. You can use it without fear with noisy sources and easily eliminate unwanted noise in low frequencies.

User's advice Static Microphone
LCT 140 AIR stereo pair Lewitt

LCT 140 AIR stereo pair Lewitt
/5
 

2 User's advice

YVES F 03/02/2022
  5 /5
Purchase Checked
TOP POUR DES PRISES DE SON STEREO
0 0 report
ANNIE S 05/11/2021
  5 /5
Purchase Checked
Bon produit
0 0 report

Spotlight on

??sv.chat.besoins.aide_en??

??sv.chat.reponse_en??