Lewitt - LCT 640 TS
Great Deal
Recommended price
978,33 €
690,83 €
excl VAT
-29%
with eco participation: 0,50 €
In Stock
Usually shipped within 3 days
+infos
Warranty 3 years
Antonin
Tristan
Need help ?
Static Microphone
Lewitt LCT 640 TS, New generation large diaphragm condenser microphone.
ARTICLE N° 66537
Specifications
-
Lewitt LCT 640 TS
-
Large diaphragm condenser microphone
-
Type: externally polarized condenser
-
Acoustic operating principle: pressure gradient sensor
-
5 selectable polar patterns: Omindirectional, wide cardioid, cardioid, supercardioid and figure 8
-
Mid-Side stereo recording capabilities
-
Low cut filter with 4 settings
-
Pad attenuation with three positions
-
Technology to pair two LCT 640 TS microphones instantly
-
Polar Pattern (Dual Output Mode): Create any polar pattern in post-production
-
POLARIZER plugin (available on the manufacturer's website), allows both directivity change from omni to figure 8 continuously as well as a change of main axis of 180 degrees.
-
Capsule: gold plated 3 micron Mylar
-
Sensor: Ø 25.4 mm
-
Polar diagram (Dual output mode): Create a polar diagram in post-production
-
Polar Pattern (Single Output Mode): Omni, Wide Cardioid, Cardioid, Supercardioid, Figure-8
-
Sensitivity: 31.4 mV/Pa, -30.1 dBV/Pa (cardioid), 30.3 mV/Pa, -30.3 dBV/Pa (omni), 34.1 mV/Pa, -29.4 dBV/Pa ( figure-8)
-
Equivalent noise level: 10 dB (A), cardioid
-
Max. SPL for 0.5% THD: 134 dBSPL, 0 dB pre-attenuation
-
Signal / noise ratio: 84 dB (A)
-
Dynamic range: 124 dB (A)
-
Pre-attenuation Pad: 0 dB, -6 dB, -12 dB, 0 dB, -18 dB
-
Low cut filter: Linear, 40 Hz (12 dB/oct), 80 Hz (12 dB/oct), 160 Hz (6 dB/oct)
-
Internal impedance: 110 Ω
-
Nominal load impedance: 1000 Ω
-
Supply voltage: 48 V +/-4 V
-
Perfect Match Technology: each LCT 640 TS undergoes a series of measurements, followed by bias voltage adjustment to achieve exactly the same sensitivity at 1 kHz in each microphone
-
Muting history: allows you to know if the microphone has been muted since its last activation
-
Consumption: 5.1 mA
-
Microphone housing: Die-cast zinc
-
Connector: Gold plated 3-pin XLR + 3-pin Mini XLR
-
Dimensions of bare microphone: 158 x 52 x 36 mm
-
Net weight of the microphone: 425 g
Presentation
The LCT 640 TS microphone from the Austrian manufacturer Lewitt revolutionizes sound recording.
What do you mean? by allowing you to modify the polarity of the microphone afterwards, if you have made a connection on 2 channels and via the use of a freely downloadable plug-in (VST2/AU/AAX)!
You will find the Polarizer plugin at this address:
https://www.lewitt-audio.com/microphones/lct-recording/lct-640-ts
How it works? the signal from the front and rear diaphragms is provided by independent circuits. So any type of polar pattern can be chosen dynamically, even after recording.
Most of the time, stereophony can only be achieved with two microphones. But with a single Lewitt LCT 640 TS, point the microphone side toward the signal source and record both outputs to one stereo track in your software or two mono tracks then change the pans to adjust the width of the stereo.
The magnetic anti-pop filter is as effective as it is discreet: it will not obstruct the vision of the singer who takes a look at his text during recording.
What do you mean? by allowing you to modify the polarity of the microphone afterwards, if you have made a connection on 2 channels and via the use of a freely downloadable plug-in (VST2/AU/AAX)!
You will find the Polarizer plugin at this address:
https://www.lewitt-audio.com/microphones/lct-recording/lct-640-ts
How it works? the signal from the front and rear diaphragms is provided by independent circuits. So any type of polar pattern can be chosen dynamically, even after recording.
Most of the time, stereophony can only be achieved with two microphones. But with a single Lewitt LCT 640 TS, point the microphone side toward the signal source and record both outputs to one stereo track in your software or two mono tracks then change the pans to adjust the width of the stereo.
The magnetic anti-pop filter is as effective as it is discreet: it will not obstruct the vision of the singer who takes a look at his text during recording.
Information
Capsule type
Capacitor
Application
Ambiance, Singing, Guitar / bass amplifier, Drum / percussions, Piano
Directivity
Cardioid, Omnidirectional, Supercardioid, Bidirectional (Figure-8), Multiple
Switchable pad
Yes
Switchable Bass-Cut filter
Yes
Acoustic pressure (dB)
From 130 to 140
Shockmount included
Yes
Popfilter
External included
Complete set
Yes
Power supply
Via +48 V phantom power supply
Connectors
XLR male 3 pins
Frequency response, upper limit
20 kHz
Frequency response, low limit
20 Hz
Packaging
Single unit
To go further...
Included with the LCT 640 TS microphone:
- Magnetic pop filter ref LCT 50 PSx
- Suspension ref LCT 40 SHx
- Transport bag ref DTP 40 Lb
- Windscreen ref LCT 40 Wx
- TS adapter cable ref LCT 40 TS
- Valiste ref LCT 50 Cx
- Magnetic pop filter ref LCT 50 PSx
- Suspension ref LCT 40 SHx
- Transport bag ref DTP 40 Lb
- Windscreen ref LCT 40 Wx
- TS adapter cable ref LCT 40 TS
- Valiste ref LCT 50 Cx
Videos
Additional documents
You may also like
Lewitt - LCT 640 TS
Lewitt - LCT 640 TS
Great Deal
Recommended price
978,33 €
690,83 €
excl VAT
-29%
with eco participation: 0,50 €
In Stock
Usually shipped within 3 days
+infos
Warranty 3 years
Antonin
Tristan
Need help ?
Spotlight on
Austrian manufacturer Lewitt, whose founders came up through the ranks at AKG, believes that good sound is for everyone, whether you're recording at home, on stage, or in the studio as a beginner or professional. To ensure that nothing limits your performance technically, Lewitt has advanced microphone technology by redesigning it from the ground up, such as the RAY studio condenser microphone, the LCT 140 AIR STEREO matched pair and the versatile LCT 440 PURE.
Similar Products
Tops of the brand
??sv.chat.besoins.aide_en??
??sv.chat.reponse_en??
